Daikin’s Underfloor Ducted Systems are an ideal solution for homes in colder climates where heating is a focus. In these situations, units are typically installed underfloor to promote even warm air distribution throughout the home.

Construction is from all aluminium extrusion with fixed full chevron blades. Standard finish is natural anodised while other finishes including powder coat are available to suit the interior and architectural design requirements. Model DG-FC Louvre Grilles are available in stock sizes and can also be manufactured to order in a wide range of sizes. Free area is 50%.

Features: Front Vanes – horizontal so the primary air leaving the outlet is directed above the room occupants and does not reach the occupied zone until well mixed with the secondary room air. Rear Vanes – vertical and are used to direct the air in a straight blow or spread the air as required by the room layout. If required, air flow can be directed at an angle to one or both sides, and still retain a near-parallel air stream pattern. Construction is all extruded aluminium horizontal and vertical blades, retained in a fixed or removable Core. Standard finish is powder coat white while other finishes are available to suit the interior and architectural design requirements.

Polyaire Metallized Core fire rated flexible duct is manufactured from metallized Mylar and clear Mylar substrates, incorporating totally encapsulated helically wound spring wire. Bonded with a fire retardant and slip resistant dry deposit adhesive, this duct construction ensures a long life span in all ambient conditions.

Construction: The frame is made from an aluminium extrusion, which supports and retains the aluminium square pattern lattice core. The standard frame flange is 25mm. Standard finish is powder coat white while other finishes are available to suit the interior and architectural design requirements. Model EC-FC, EC-LC, EC-RC and EC-HF are available in stock sizes and can also be manufactured to order in a wide range of sizes. Item # Nominal Neck Size (mm/inch) Face Size (mm/inch) 245593 150×150 / 6×6 195×195 / 8×8 245595 200×200 / 8×8 245×245 / 10×10 245596 250×250 / 10×10 295×295 / 12×12 245597 300×300 / 12×12 345×345 / 14×14 245599 350×350 / 14×14 395×395 / 16×16 245603 400×400 / 16×16 445×445 / 18×18 245604 450×450 / 18×18 495×495 / 20×20 245605 500×500 / 20×20 545×545 / 22×22 245625 550×250 / 22×10 595×295 / 23×12 245610 550×550 / 22×22 595×595 / 23×23 245619 1150×550 / 45×22 1195×595 /

ARE YOU A TRADIE? - Log in / register for wholesale pricing - Click & collect is available

ARE YOU A TRADIE? - Log in / register for wholesale pricing - Click & collect is available

Features: Complies to Australian Standard AS 4254 Test Certificate available Aluminium Inner Core Polyester Insulation Aluminium Outer Jacket

Polyaire Firebreak Flexible Duct is manufactured from metalized Mylar and clear Mylar substrates, incorporating totally enclosed helically wound galvanised high tensile steel wire.

Polyaire Firebreak Flexible Duct is manufactured from metalized Mylar and clear Mylar substrates, incorporating totally enclosed helically wound galvanised high tensile steel wire.

Features: Better insulation Less temperature gain/loss in the roof Better temperature transference to rooms Reduced running costs Higher efficiency Meets or exceeds BCA for all Australian regions 10 year warranty

Polyaire Silentflex fire rated flexible duct is manufactured from metallized Mylar and clear Mylar substrates, incorporating totally encapsulated helically wound spring wire.